Microstructural and Electrochemical Evaluation of Fusion Welded Low-Nickel and 304 SS at Different Heat Input

The present research study investigates the effect of heat input using E 308 electrode (controlled by welding current, i.e., 70, 85 and 100 A) on microstructure, mechanical properties and corrosion behavior of low-nickel and 304 stainless steel (SS) weldments produced by shielded metal arc welding technique. SEM investigation shows that with the higher heat input, δ-ferrite content was reduced. Dendrite and inter-dendritic length is also reduced by lowering the heat input. For all the heat inputs, it is observed that δ-ferrite content was higher in 304 stainless steel (SS) as compared to that of low-nickel austenitic stainless steel (Cr-Mn SS). Considering the heat input for Cr-Mn SS, coarse grains were observed in the heat-affected zone region. For low heat input (LHI), tensile fracture surface has exhibited river-like pattern with dimple appearance. Corrosion studies show better pitting resistance for low heat input (LHI) samples due to higher δ-ferrite present in the weld region. Similarly, higher interphase corrosion resistance is observed in both the SS grades causing more dissolution in the LHI samples.     

Methane Emission from Rice Fields at Cuttack, India

Methane (CH₄) emission from rice fields at Cuttack (State of Orissa, eastern India) has been recorded using an automatic measurement system (closed chamber method) from 1995–1998. Experiments were laid out to test the impact of water regime, organic amendment, inorganic amendment and rice cultivars. Organic amendments in conjunction with chemical N (urea) effected higher CH₄ flux over that of chemical N alone. Application of Sesbania, Azolla and compost resulted in 132, 65 and 68 kg CH₄ ha^–1 in the wet season of 1996 when pure urea application resulted in 42 kg CH₄ ha^–1. Intermittent irrigation reduced emissions by 15% as compared to continuous flooding in the dry season of 1996. In the wet season of 1995, four cultivars were tested under rainfed conditions resulting in a range of emissions from 20 to 44 kg CH₄ ha^–1. Application of nitrification inhibitor dicyandiamide (DCD) inhibited while Nimin stimulated CH₄ flux from flooded rice compared to that of urea N alone. Wide variation in CH₄ production and oxidation potentials was observed in rice soils tested. Methane oxidation decreased with soil depth, fertilizer-N and nitrification inhibitors while organic amendment stimulated it. The results indicate that CH₄ emission from the representative rainfed ecosystem at the experimental site averaged to 32 kg CH₄ ha^–1 yr^–1.     

Simulation of Combustion Space Heat Transfer of Glass Melting Furnace

Radiation plays a dominant role in combustion space heat transfer. It is composed of three components, namely gaseous species radiation, soot radiation and crown surface radiation. The basis for model validation and the subsequent study of furnace operation is the spatial variation of radiant heat flux. Hayes and colleagues carried out measurements of crown incident radiant heat flux along the furnace axial centerline and developed a numerical model. However, the effect of soot was not quantified. In the present work, a numerical model is developed which considers the effect of soot radiation and is simulated using Fluent. The proposed model fits the experimental data of Hayes and colleagues within an error band of –6% to +14%.     

FTIR spectra and physico-chemical behavior of vinyl ester participated transesterification and curing of jute

In this article we report the transesterification of jute with n-Butylacrylate (BA) under appropriate condition using NaOH, Pyridine (Py), and a Pyridine–acetone mixture as a catalyst. The modified vinylog jute was subsequently cured with benzoylperoxide (BPO) in acetone at 50–60°C. The parent and chemically modified jute were characterized by FTIR spectra. The percent moisture regain, mechanical strength, and behavior to common chemical reagents of the parent and modified fibers have also been tested. Transesterification and curing of jute lowered the percentage of moisture regain, imparted mechanical strength, and resistance to common chemical reagents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 575–581, 2001     

Graft Copolymerization of Acrylonitrile on Chemically Modified Sisal Fibers

Graft copolymerization of acrylonitrile (AN) on chemically modified sisal fibers was studied using a combination of NaIO₄ and CuSO₄ as initiator in an aqueous medium in the temperature range of 50–70°C. Effects of reaction medium, variation of time and temperature, concentration of CuSO₄, NaIO₄ and AN, and the amount of sisal fiber on the percentage of graft yield have been investigated. Water absorption (%) and tensile properties such as tensile strength, Young's modulus and extension at break of untreated, chemically modified and AN‐grafted sisal fibers were evaluated and compared. FTIR spectroscopy and scanning electron microscopy (SEM) of the chemically modified and AN‐grafted sisal fibers have been carried out.     

Sulfur specificity in the bench‐scale biological desulfurization of crude oil by Rhodococcus IGTS8

Biological removal of organic sulfur from petroleum feedstocks may offer an attractive alternative to conventional thermochemical treatment due to the mild operating conditions and greater reaction specificity afforded by the nature of biocatalysis. Previous investigations have either reported the desulfurization of model sulfur compounds in organic solvents or gross desulfurization of crude oil without data on which sulfur species were being removed. This study reports initial sulfur speciation data for thiophenic sulfur compounds present in crude oil which may be used as a guide both as to which species are treated by the biocatalyst investigated as well as to where biocatalyst development is needed to improve the extent of biological desulfurization when applied to whole crudes. Biodesulfurization of two different crude oils in the 22–31 ° API specific gravity range with total sulfur contents between 1 and 2% is demonstrated in 1‐dm³ batch stirred reactors using wild type Rhodococcus sp IGTS8. While analysis of the crudes before and after biodesulfurization did not reveal a decrease in total sulfur, GC–MS did reveal significant (43–99%) desulfurization of dibenzothiophenes (DBT) and substituted DBTs. Fractionation of the whole crude, followed by analysis using gas chromatography–sulfur chemiluminescence detection (GC–SCD) of the aromatic fraction of the Van Texas crude oil, demonstrated a reduction of sulfur in this fraction from 3.8% to 3.2%. This research indicates that IGTS8 may be capable of biodesulfurization of refined products such as gasoline and diesel whose predominant sulfur species are dibenzothiophenes. Further biocatalyst development would be needed for effective treatment of the spectrum of sulfur‐bearing compounds present in whole crudes.     

Graft copolymerization of methyl methacrylate onto jute fiber initiated by cerium(IV)–DMSO redox initiator system

The kinetics of graft copolymerization of methyl methacrylate (MMA) onto chemically modified jute fibers initiated by the Ce(IV)–DMSO redox system was studied in the temperature range of 40–60°C. By studying the effects of the concentration of the monomer, Ce(IV), and DMSO on the rate of grafting, the optimum conditions for grafting were determined. Also, the effect of temperature, time, concentration of the acid, the amount of jute fiber, and some inorganic salts and organic solvents on the rate was investigated. A kinetic scheme was proposed on the basis of the experimental findings. Infrared spectra of chemically modified jute and grafted jute was investigated. More than 120% of grafting could be achieved with the present system. The characterization of MMA-grafted chemically modified jute by TGA and DTA studies was made. The thermal stability of the jute fibers was improved by grafting. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2569–2576, 1998     

Discretization techniques for the efficient solution of the eigenvalue problem in heterostructures

A systematic development of efficient discretization schemes for the numerical evaluation of the eigenvalues of the single‐band effective mass equation that describes the motion of electrons in an ideal periodic crystal is presented. The approach presented makes use of the translational symmetry of the crystal lattice and utilizes the quantum mechanical properties of the momentum operator as the generator of spatial translation. Boundary conditions satisfied at the heterointerfaces are explicitly incorporated in the discretization procedure and the effects of this approach in overall accuracy are evaluated by studying a prototype quantum well heterostructure. Copyright © 2008 John Wiley & Sons, Ltd.     

Drop breakage in a single-pass through vortex-based cavitation device: Experiments and modeling

Liquid–liquid emulsions are used in many sectors such as personal care, home care, and food products. There is an increasing need for developing compact and modular devices for producing emulsions with desired droplet size distribution (DSD). In this work, we have experimentally and computationally investigated an application of vortex-based hydrodynamic cavitation (HC) device for producing emulsions. The focus is on understanding drop breakage occurring in a single-pass through the considered HC device. The experiments were performed for generating oil-in-water emulsion containing 1%–20% rapeseed oil. The effect of pressure drop across the HC device in the range of 50–250 kPa on drop breakage was examined. DSD of emulsions produced through a single pass was measured using the focussed beam reflectance measurements. Comprehensive computational fluid dynamics (CFD) model based on the Eulerian approach was developed to simulate multiphase cavitating flow. Using the simulated flow, population balance model (PBM) with appropriate breakage kernels was solved to simulate droplet breakage in a vortex-based HC device. The device showed an excellent drop breakage efficiency (nearly 1% which is much higher than other commercial devices such as rotor–stators or sonolators) and was able to reduce mean drop size from 66 to ~15 μm in a single pass. The CFD and PBM models were able to simulate DSD. The presented models and results will be useful for researchers and engineers interested in developing compact devices for producing emulsions of desired DSD.     

Discovery and Biosynthesis of Ureidopeptide Natural Products Macrocyclized via Indole N-acylation in Marine Microbulbifer spp. Bacteria

Commensal bacteria associated with marine invertebrates are underappreciated sources of chemically novel natural products. Using mass spectrometry, we had previously detected the presence of peptidic natural products in obligate marine bacteria of the genus Microbulbifer cultured from marine sponges. In this report, the isolation and structural characterization of a panel of ureidohexapeptide natural products, termed the bulbiferamides, from Microbulbifer strains is reported wherein the tryptophan side chain indole participates in a macrocyclizing peptide bond formation. Genome sequencing identifies biosynthetic gene clusters encoding production of the bulbiferamides and implicates the involvement of a thioesterase in the indolic macrocycle formation. The structural diversity and widespread presence of bulbiferamides in commensal microbiomes of marine invertebrates point toward a possible ecological role for these natural products.